Dell S510 User Manual page 126

Item
4 DHCP
5 IP Address
6 Subnet Mask
7 Default Gateway
8 DNS Server
9 Send
User Password
Select the Enabled check box to require a password to open the operation
window on the computer.
Item
1 New Password
2 Confirm
3 Send
126 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
Description
Select the Enabled check box to use DHCP.
You cannot enter an IP address if DHCP is
enabled.
Enter the IP address to assign to the currently
connected projector.
Enter a subnet mask for the currently
connected projector.
Enter the gateway address for the currently
connected projector.
Enter the DNS server IP address for the
currently connected projector.
Click this button to confirm the changes made
to the projector.
Description
Enter the new password when changing the
password to open the operation window. (Up
to 26 single-byte alphanumerical characters)
Enter the same password as you entered in
New Password. If the passwords are not the
same, an error is displayed.
Click this button to confirm the changes made
to the User Password.