Dell S510 User Manual page 46

P
ROJECTOR
The projector settings menu provides the following options:
A
UTO
If you press the Source button when the Auto Source mode is set to
Off, you can manually select the input signal. Select On to auto detect
the available input signals. If you press the Source button when the
projector is on, it automatically finds the next available input signal.
P
ROJECTOR
depending upon how the projector is mounted.
•Rear Projection-Wall Mount — The projector reverses and turns the
image upside down. You can project from behind a translucent screen
with a wall-mounted projection (for regular projection).
•Front Projection-Wall Mount — The projector turns the image upside
down for wall-mounted projection.
46 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
NOTE:
When you want to create a 3D experience, you will need a
1
few other components including:
"Active" 3D glasses with DLP Link™.
a
3D content. See "Note 2".
b
3D Player.
c
HDMI 1.4a 3D support and refresh rate are as below:
2
1280x720p@50 Hz Frame Packing
a
1280x720p@59.94/60 Hz Frame Packing
b
1920x1080p@23.98/24 Hz Frame Packing
c
1920x1080i@50 Hz Side by Side Half
d
1920x1080i@59.94/60 Hz Side by Side Half
e
1280x720p@50 Hz Top and Bottom
f
1280x720p@59.94/60 Hz Top and Bottom
g
1920x1080p@23.98/24 Hz Top and Bottom
h
S —
Select and press
ETTINGS
S —Select Off (the default) to lock the current input signal.
OURCE
M —Allows you to select the projector mode,
ODE
to activate projector settings.