USB Display (DoUSB) Installation
For Windows Operating System
1
Connect the power cable and press the power button.
2
Connect the USB (type A to B) cable to the projector and the
computer.
3
When you connect the projector and computer via USB cable, a USB
Connected message will pop up and allow you to select DoUSB or
Storage Mode. Select "DoUSB" option to switch to the USB Display
source.
NOTE:
Projector" on page 133.
Downloaded From projector-manual.com DELL Manuals
If the DoUSB can't display, please see "Troubleshooting Your
Using Your Projector
101