Dell S510 User Manual page 128

FAQS:
I would like to remotely
access the projector via the
Internet. What is the best
setting for the browser?
I would like to remotely
access the projector via
Internet. What socket port
number should I open for it
in the firewall?
Why am I unable to access
the projector via the
Internet?
128 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
To have the best setting for the browser,
please follow the below steps:
1 Open Control Panel
Options General tab
Temporary Internet Files
Select Every visit to the pages.
2 Some firewall or anti-virus may block
the HTTP application. If possible, turn
off the firewall or anti-virus.
The following are the TCP/IP socket ports
which the projector uses.
UDP/TCP Port
Number
TCP 80
UDP/TCP 25
UDP/TCP 161
UDP 9131
1 Check whether your computer/laptop
is connected to the Internet.
2
Check with your MIS or network
administrator whether your
computer/laptop is in the same
subnet.
Internet
Settings
Description
Web
configuration
(HTTP)
SMTP: used for
email routing
between mail
servers
SNMP: Simple
Network
Management
Protocol
AMX: used for
AMX discovery