Dell S510 User Manual page 50

R
ESET
M S
ENU ETTINGS
menu settings consists of the following options:
M
ENU
on the screen.
M
ENU
default, the OSD disappears after 20 seconds of non-activity.
M
ENU
OSD background.
P
ASSWORD
screen requesting you to enter a password will be displayed when the
power plug is inserted into the electrical output and the power for the
projector is first turned on. By default, this function is disabled. You
can enable this feature by selecting Enabled. If the password has been
set before, key in the password first and select the function. This
password security feature will be activated the next time you turn on
the projector. If you enable this feature, you will be asked to enter the
projector's password after you turn on the projector:
50 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
and
Use
1
Gateway, DNS, and Store.
Press the button to enter IP Address, Subnet Mask,
2
Gateway, or DNS to set the value. (The selected option is
highlighted in blue)
Use and
a
Use and
b
After the setup is complete, press the
c
After the IP Address, Subnet Mask, Gateway, and DNS is set
3
up, select Store and press
If you select Store without pressing the Enter button, the
4
system will keep the original settings.
—Press to reset wireless configuration.
—
Select and press
P —Allows you to change the position of the OSD menu
OSITION
T —Allows you to adjust the time for an OSD timeout. By
IMEOUT
T —Select to change the transparency level of the
RANSPARENCY
—When Password Protect is enabled, a Password Protect
button to select IP Address, Subnet Mask,
button to select the option.
button to set the value.
button to store the settings.
to activate the menu settings. The
button to exit.