Dell S510 User Manual page 49

R
W
IRELESS
wireless settings menu provides the following options:
DHCP S
S
address of the DHCP server to the projector connected to the wireless.
E
of the DHCP server to the projector connected to the wireless.
S
G
administrator if you configure it manually.
DNS—Check the DNS Server IP address with your network/system
administrator if you configure it manually.
S
settings.
Downloaded From projector-manual.com DELL Manuals
Use and
1
Gateway, DNS, and Store.
Press the
2
Gateway or DNS to set the value. (The selected option is
highlighted in blue)
Use
a
Use
b
After the setup is complete, press the
c
After the IP Address, Subnet Mask, Gateway, and DNS is set
3
up, select Store and press
If you select Store without pressing the Enter button, the
4
system will keep the original settings.
—Press to reset network configuration.
ESET
S —
Select and press
ETTINGS
—Allows you to enable DHCP server of the wireless.
ERVER
IP A —Automatically or manually assigns the Start IP
TART DDRESS
IP A —Automatically or manually assigns the End IP address
ND DDRESS
M —Configure the Subnet Mask of the wireless connection.
UBNET ASK
—Check the Gateway address with your network/system
ATEWAY
—Press to save the changes made in wireless configuration
TORE
NOTE:
button to select IP Address, Subnet Mask,
button to enter IP Address, Subnet Mask,
and button to select the option.
and button to set the value.
to activate wireless settings. The
button to exit.
button to store the settings.
Using Your Projector 49