Dell S510 User Manual page 106

The PenDriver install message will pop-up automatically after
4
you plug in the USB cable to your computer. Follow the on-
screen instruction to complete setup.
The driver icon
area if the driver has installed successfully.
If the Pen driver is not automatically installed, go to My
Computer and run "PenDriver.exe".
NOTE:
driver. Contact your network administrator for support.
Click the Pen driver
5
select Auto on the sub-menu.
If the "auto calibrate failed" message prompts, please take the
steps below for troubleshooting, then do auto calibrate again.
a Turn lights off or reduce stray light to whiteboard
b Do not walk in front of or move the projector
106 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
will appear in your computer's notification
You may require administrator-level access to install the
icon, select Calibrate pen and then