Set A Pin To Protect The Computer; Use Gloves With The Touch Screen - Honeywell Dolphin CT50 User Manual

Set a PIN to Protect the Computer

Use Gloves with the Touch Screen

Dolphin CT50 Mobile Computer User Guide
After you start using the computer, you should set a PIN to secure apps
and data on the computer.
1 Tap All Apps > Settings > Security.
2 Tap Screen lock. You can choose between these screen lock
settings:
• None
• Swipe
• Pattern
• PIN
• Password
3 Tap the screen lock of your choice and follow the screens to
configure it.
4 Exit the Settings app.
You can use gloves, including leather, when operating the touch screen
on the computer. The gloves can be up to 2 mm (0.08 inches) thick. Use
this procedure to set the touch screen to "glove mode."
1 Press the flat part of the gloved finger to the touch screen.
You want to have approximately 13 mm (0.51 inch) surface area
touching the screen, almost as if taking a fingerprint.
2 Tap the screen subsequently to use it with your gloved hands.
3 Exit "glove mode" by tapping the screen with your bare finger.
Chapter 1 — About the Computer Features
15