About The Structure Of The Settings App - Honeywell Dolphin CT50 User Manual

About the Structure of the Settings App

Dolphin CT50 Mobile Computer User Guide
Use this section to learn about the structure of the Settings app so you
can find parameters quickly.
Wireless & Networks
Setting Description
Wi-Fi Turns the Wi-Fi radio on and off. When Wi-Fi is turned
on, tap the bar to see a list of Wi-Fi networks.
Bluetooth Turns the Bluetooth radio on and off. When bluetooth
is turned on, tap the bar to see a list of Bluetooth
devices in range.
Ethernet Turns Ethernet on and off. When Ethernet is turned
on, you can change the Ethernet settings and set up a
proxy.
Data usage Displays a list of phone data usage for the current data
usage cycle. Tap the Data usage cycle list to select
another date range.
More... Airplane mode: Turns airplane mode on and off.
NFC: Turns on NFC which allows data exchange when
the CT50 touches another device.
Android Beam: When NFC is enabled, this feature lets
you beam app content to another NFC-capable device
by holding the devices close together. The app
determines what content gets beamed.
VPN: Sets the password parameters for a virtual
private network (VPN).
Select Default ISO-DEP route: Determines whether
the computer uses the host device or embedded
secure elements for the card emulation mode.
Mobile networks: Includes settings for mobile
networks, including enabling data access and roaming
over mobile networks, selecting access points and
network operators, or selecting only 2G networks (to
save battery life).
Mobile plan: Provides information on your cell phone
plan.
Cell broadcasts: Sets what emergency information you
want to receive and how you want to receive it.
Chapter 6 — Configure the Computer
59