Change The Measuring Unit; Change The Temp ℃ ℉ , Unit - Lutron Electronics AM-4205A Operation Manual

5-1 Change the measuring unit

Change the measurement unit are available for
Anemometer
a. Use " Function button " ( 3-3, Fig. 1 ) to select the desiring
measuring unit.
Anemometer
b. After select the desiring unit, press the " Enter
button " ( 3-4, Fig. 1 ) to save the data with default.
5-2 Change thermocouple type to K or J
Change " thermocouple type to K or J " only available
for
Type K/J Thermometer
a. Use " Function button " ( 3-3, Fig. 1 ) to select " K " or " J ".
b. After select the desiring value ( K or J ), press the
" Enter button " ( 3-4, Fig. 1 ) to save the data with
default.
5-3 Change the Temp
Change the " Temp
Anemometer meter
Humidity meter
Type K/J Thermometer
a. Use " Function button " ( 3-3, Fig. 1 ) to select "
or " ".
℉
b. After select the desiring value (
" Enter button " ( 3-4, Fig. 1 ) to save the data with
default.
m/S, km/h, mph, knot, FPM
, unit
℃ ℉
, unit " only available for the
℃ ℉
℃
14
℃
or ), press the
℉
"