Table of Contents
Advertisement
4-4 Both Anemometer/Thermometer
1) Install the " Vane Probe Plug " ( 3-9, Fig. 1 ) into the
" Anemometer Socket " ( 3-13, Fig. 2 ).
Connect the plug of the Temp. probe ( optional, such as
type K probe, TP-01, TP-02A, TP-03, TP-04 ) into the "
Thermometer socket " ( 3-14, Fig. 2 ).
2) Power on the meter by pressing the " Power Button "
( 3-2 , Fig. 1 ) once.
3) The main measuring procedures are same as above
chapter and chapter 4-3.
4) Press the " Function Button " ( 3-3, Fig. 1 ) continuously
at least 2 seconds, the function will change from " Air
velocity " to " Thermometer " in cycling.
4-5 Both Humidity meter/Thermometer
1) Install the " Humidity Probe Plug " ( 3-12, Fig. 1 ) into the
" Humidity Socket " ( 3-13, Fig. 2 ).
Connect the plug of the Temp. probe ( optional, such as
type K probe, TP-01, TP-02A, TP-03, TP-04 ) into the "
Thermometer socket " ( 3-14, Fig. 2 ).
2) Power on the meter by pressing the " Power Button "
( 3-2 , Fig. 1 ) once.
3) The main measuring procedures are same as above
chapter 4-2 and chapter 4-3.
4) Press the " Function Button " ( 3-3, Fig. 1 ) continuously
at least 2 seconds, the function will change from "
Humidity " to " Thermometer " in cycling.
11
Advertisement
Table of Contents
