Table of Contents
Advertisement
5. ADVANCED SETTING PROCEDURES
Before executing Advanced Setting Procedures,
exit the " Hold function " and the Record "
function first.
* Press " Setting Button " continuously at
least 5 seconds to enter the setting function.
* After already set the desiring value ( function ),
press the " Enter button " to save with default.
* Press the " Esc button " to escape the setting
procedures.
a. Hold the " Setting Button " ( 3-5, Fig. 1 ) at least five
seconds will enter the Advanced Setting Procedures.
b. One by one to press the " Setting Button " ( 3-5, Fig. 1 )
once a while to select the main setting function in sequence
and show the text the lower display as :
Unit...... Change the measurement unit
K............Change thermocouple type to type K or type J
...........
Change the Temp
℃
OFF....... Auto power ON/OFF management
Code......Code entering for the further calibration usage
,
unit
℃ ℉
13
Advertisement
Table of Contents
