Remote Access - Panasonic PalmCam PV-DC2090 Operating Instructions Manual

This function enables you to operate the
camera from great distances with the use of
a modem.
• Remote recording from the PC.
• Downloading selected images to the PC.
2
LED
Lamp
3
Note :
Before operating Remote Access,
• Be sure to install PalmCam Camera
Driver (see pages 46, 52).
• Be sure to insert CF Card and Modem
Card into the card slot.
• Make all connection on page 58.
• The Camera must be turned on.
• For extended period of use, it is
recommended to use the AC Adaptor
(optional) for a power source.

Remote Access

1
Set POWER to MANUAL REC.
• The LED Lamp lights up.
2
Press MENU to display MANUAL REC
1
menu.
<MANUAL REC 1/3>
REC MODE
CARD SLOT
FLASH
SELF TIMER
IRIS
SEL
EXIT : MENU
• When the recording mode is set to
(Motion Image Rec) or
the recording mode will go to F (Fine).
3
Press
ACCESS and press
REMOTE ACCESS
PUSH MENU TO EXIT
CARD1
10 F
N
NO. 1
AUTO
OFF
: SET :
(Burst Rec),
or to select REMOTE
.
61