Panasonic PalmCam PV-DC2090 Operating Instructions Manual page 21

Recording Mode
Recording Mode
SF : Super Fine Mode
Select this mode when you want
the highest quality resolution with
the lowest compression
(i.e. for printing).
F : Fine Mode
Select this mode when you want a
high resolution
(i.e. for printing or for archiving an
image).
N : Normal Mode
Select this mode when you want a
lower resolution image
(i.e. for e-mailing or posting on the
Internet).
ZOOM : Zoom Mode
Using ZOOM mode magnifies the
image to twice its normal size.
: Motion Image Rec Mode
Capture an image every 0.1 sec/
frame to create a 4 sec. mini movie.
• The LED Lamp will flash while
processing a motion image.
: Burst Rec Mode
Capture image every 0.5 sec./
frame up to 16 frames while
shutter button is pressed.
• If the remaining page number is
less than 16, you will only be able
to capture up to the number of
images remaining in memory.
Capturing Images
Image Resolution and Capacity
Image
REC Mode
Resolution
SF 1,280 x 960
F 1,280 x 960
N 640 x 480
640 x 480
ZOOM
320 x 240
640 x 480
• The number of images given for each
mode applies when all images are taken
in same mode.
• You can change recording modes at
any time before capturing an image.
• The number of images that can be taken
may differ depending on the subject.
After capturing an image, the number
may not decrease or may decrease by
two.
Capacity
(w/Supplied 8MB CF Card)
Approx. 15 images
Approx. 30 images
Approx. 100 images
Approx. 100 images
Approx. 6 images
Approx. 100 images
21