Panasonic PalmCam PV-DC2090 Operating Instructions Manual page 54

Transferring Your Images (Macintosh)
Connection
1
Turn off your PC (Macintosh).
2
Connect the Digital Camera to your PC (Macintosh) using the PC connecting cable
(supplied) and PC Connecting Cable Adaptor for Macintosh (Optional).
3
Turn on your PC (Macintosh).
4
Set the Digital Camera POWER to switch to PLAY.
• The LED Lamp lights up.
Note:
• For extended periods of use, it is recommended to use the AC Adaptor as a power
source.
• While the PC communicates with the Digital Camera, the Digital Camera cannot be
operated.
54
Modem
4
port or
printer port
SERIAL
Terminal
2
PC Connecting
Cable for Windows
(Supplied)
For assistance, call 1-800-272-7033.
1, 3
PC Connecting
Cable Adaptor
for Macintosh
(Optional)