Panasonic PalmCam PV-DC2090 Operating Instructions Manual page 31

(Flash) Button
B/W Full Feature
Indicator Panel
(Model PV-DC2590 Only)
The Flash will start charging and LCD Viewfinder will go OFF in the following
conditions ;
• POWER is set from OFF to REC and flash is in Flash mode.
• POWER is set from PLAY to REC and flash is in Flash mode.
• POWER is set to REC and Flash mode is changed from OFF to Flash mode.
• During image capture, after flash has occurred.
Using the built-in Flash
For model PV-DC2590,
Do step 1 on the left page.
Then, press
mode.
• Selected mode will be changed on the
B/W Full Feature Indicator Panel
(see page 10).
repeatedly to select flash
31