Power Supply - Panasonic PalmCam PV-DC2090 Operating Instructions Manual

Power Supply

Loading the Alkaline Batteries
Bottom View
+ - +
WARNING! Do not dispose of in fire, put in backwards, disassemble, or short circuit;
otherwise battery may leak or burst, causing possible personal injury.
Battery Notes
Safety precautions:
• Do not mix old and new batteries.
• Do not mix alkaline with manganese
batteries.
• Do not get the AA alkaline batteries near,
or dispose of in fire.
• Do not directly connect (short circuit) the
positive (+) and negative (–) terminals.
• Never attempt to disassemble or reas-
semble the Battery.
• Do not drop or jar the Battery.
Note:
• Instead of the supplied Alkaline batteries,
you can also use AA type Ni-Cd (high
density type) or nickel-hydride batteries
available on the market.
• If you are not going to use the Digital
Camera for an extended period of time,
remove the batteries from the Digital
Camera.
14
1
While pressing the Lock button, slide
the Battery Compartment lid in the
direction of the arrow and swing it open.
2
Install four Alkaline Batteries.
• Be sure to use Alkaline Batteries.
-
Never use manganese batteries.
• Make sure that the positive (+) and (-)
ends of the batteries are facing the
correct direction.
3
Swing the Battery Compartment lid
down and slide it shut.
Operation Time
When using the supplied Panasonic
alkaline batteries, you will have a maximum
of about 160 images* (at an ambient
temperature of 25°C).
* Conditions :
• Using the Panasonic Alkaline batteries.
• Capturing an image every 30 seconds.
• Using Flash once for every other capture.
• Recording mode is Normal.
For assistance, call 1-800-272-7033.