Time Lapse Recording - Panasonic PalmCam PV-DC2090 Operating Instructions Manual

Time Lapse enables you to set the camera
to automatically capture an image from
once every minute to once every 24 hours.
2, 4
LED
Lamp
3
Note :
• During time lapse recording (even during
non-recording intervals), the battery may
become depleted. Therefore, using an
AC Adaptor (optional) is recommended.

Time Lapse Recording

1
Set POWER to MANUAL REC.
• The LED Lamp lights up.
2
Press MENU to display MANUAL REC
5
menu.
<MANUAL REC 1/3>
REC MODE
CARD SLOT
FLASH
SELF-TIMER
IRIS
SEL
EXIT : MENU
3
Press
and press
You can select a capture rate of 1MIN,
5MIN, 10MIN, 30MIN, 1HOUR,
6HOUR, 12HOUR, or 24HOUR.
1
<MANUAL REC 2/3>
FOCUS
WHITE BALANCE
LIGHT METER
B/W
TIME LAPSE
SEL
EXIT : MENU
• Time Lapse feature is available with
Super Fine (SF), Fine (F), Normal (N) and
Zoom mode.
If the REC mode is set to
please change REC mode (see page 21).
4
Press MENU to set time lapse mode.
TIME LAPSE MODE
PUSH SHTR TO START
PUSH MENU TO EXIT
CARD1
5
10 F
Press SHTR to start time lapse mode
recording.
TIME LAPSE MODE
PUSH MENU TO EXIT
CARD1
10 F
• LED Lamp will flash while the Digital
Camera processes the image
• Press MENU to exit this mode.
N
NO. 1
AUTO
OFF
: SET :
or to select TIME LAPSE
to select time interval.
AUTO
AUTO
AUTO
OFF
OFF
: SET :
or ,
37