Panasonic PalmCam PV-DC2090 Operating Instructions Manual page 22

Capturing Images
Beep
Set to ON to beep when capturing an
image.
To cancel the beep, set to OFF.
2, 5
LED
Lamp
3, 4
Stand By
STAND BY
22
1
Set POWER to REC.
• The LED Lamp lights up.
2
Press MENU to display REC MENU.
<REC MENU>
REC MODE
CARD SLOT
FLASH
SELF TIMER
OTHERS
SEL :
EXIT : MENU
3
Press or
press to display OTHERS menu.
<OTHERS>
BRIGHTNESS
CLOCK SET
1
BEEP
SEL :
EXIT : MENU
4
Press or
press or
<OTHERS>
BRIGHTNESS
CLOCK SET
BEEP
SEL :
EXIT : MENU
5
Press MENU twice to exit.
Digital Camera will beep:
• Once when you capture an image
• Twice when you press the shutter button
half way to adjust the focus.
Press STAND BY, lens will not shorten and
power will turn off. If no operation is
performed for one minute while POWER is
ON, the Camera will go to Stand By mode.
To resume Power ON, press STAND BY.
For assistance, call 1-800-272-7033.
N
NO. 1
AUTO
OFF
SET :
to select OTHERS, and
ON
SET :
to select BEEP and
to select ON or OFF.
ON
SET :