Communication - Panasonic PalmCam PV-DC2090 Operating Instructions Manual

Communication

This function enables you to send images
from the Camera to a PC or Fax machine in
a remote location using a modem.
LED
9 2
Lamp
3, 4, 5,
6, 7, 9
Note :
Before operating Communication;
• Be sure to install and run PalmCam
Camera Driver. (see pages 46, 52).
• Be sure to insert CF Card and Modem
Card into the card slot.
• Make all connection on page 58.
• The PC must be turned on.
• For extended period of use, it is
recommended to use the AC Adaptor
(optional) for a power source.
• Please input your name and telephone
number to comply with FCC regulations.
(see page 76)
74
1
Set POWER to PLAY.
• The LED Lamp lights up.
8, 10
2
Press MENU to display PLAY MENU.
3
Press
1
TION and press
• If the Compact Modem Card is not
inserted, "COMMUNICATION" can
not be selected.
4
Press
or 20PPS from LINE TYPE and press
.
• If you have touch tone service, set to
tone. If rotary or pulse service is
used, set to 10PPS or 20PPS.
Normally, 10PPS is selected.
For assistance, call 1-800-272-7033.
<PLAY MENU 1/2>
DISPLAY MODE NORMAL
NO. 1
CARD SLOT
DELETE
COPY
PRINT MARK
SEL : SET :
EXIT : MENU
or to select COMMUNICA-
.
<PLAY MENU 2/2>
SLIDE SHOW
COMMUNICATION
OTHERS
SEL : SET :
EXIT : MENU
or to select TONE, 10PPS,
<COMMUNICATION>
LINE TYPE TONE
V34
MODEM TYPE
FAX
MODE
SEL PAGE
SEL : SET :
EXIT : MENU