Communication Function - Panasonic PalmCam PV-DC2090 Operating Instructions Manual

Communication Function

Image file transfer via a regular telephone
line using the Compact Modem Card.
Refer to Remote Access (pages 61~73)
and Communication (pages 74, 75) for
complete operating instructions.
Please also see the diagram on page 59 to
view the Compact Modem functions.
CompactFlash Card
Modem Card Slot
Note :
Communication Function is only available in the USA.
This is not an e-mail function.
How to attach the Ferrite Core
Attachment to the modular cord to for FCC Standard observance.
1
3
5
58
1
CARD SLOT 1
CARD SLOT 2
2
3
Compact Modem
Card
(PV-DC2590 only)
1
2
2
3
4
4
5
For assistance, call 1-800-272-7033.
Set POWER OFF before inserting the
CompactFlash card and modem card.
Insert the CF Card and Compact
Modem Card into the CompactFlash
Card Slots in the direction of the arrow
mark and so that the arrow mark side
of the card faces the front (lens side) of
the Digital Camera.
Push the cards fully into the
CompactFlash Card Slots.
Connect the Modem Cable into the
Modem Card, and connect Modular
Jack to the Modular Cord.
Modular Cord
(Sold separately)
Open the catch of the Ferrite Core.
Wind the modular cable cord tightly
around the opened Ferrite Core to
make one complete loop as shown.
Close the Ferrite Core Housing.
Thread the cable tie through the hole
in the Ferrite Core Housing.
Fasten the Ferrite Core Housing on
the cable so that it does not move.