Panasonic PalmCam PV-DC2090 Operating Instructions Manual page 55

Transferring Your Images (Macintosh)
Running the Application
1
Double click the PalmCam icon.
2
PalmCam Driver is opened.
Note :
To specify the PORT to which the Camera
is connected. The commands in the COM
Port Setup menu are used to change the
COM Port or Baud Rate. The application
will communicate with the Camera using
the set COM Port.
1 Select [Communication] from the [File],
and the select [COM Port Setup...].
2 Select the Serial Port to connect with the
Camera.
• The default setting is Modem Port.
• If you press "Auto Setup", the Port to
which the Camera is connected is
detected and selected automatically.
3 Select the Baud Rate with the Camera.
• The default setting is 57600bps.
• Depending on the PC being used, some
baudrates may not have be available.
Please refer to your PC manual.
55