Switching
4.5 VLAN
Figure 29: VLAN Global dialog
4.5.2
Current VLAN
With this dialog you can:
display VLAN parameters
The Current VLAN table shows all
– manually configured VLANs
– VLANs configured via redundancy mechanisms
– VLANs configured via GVRP
The Current VLAN table is only used for information purposes. You can make
changes to the entries in the VLAN:Static dialog.
Note: Ports not displayed are participants in the link aggregation. You can
assign these ports to a VLAN using the port assigned to the link aggregation
in module 8 (display 8.X).
RM Web L3E
111
Release 6.0 07/2010