Tftp Software Update; Http Software Update - Hirschmann MACH 4000 Reference Manual

Basic Settings
Running Version
The currently loaded software version.
Backup Version
The previous software version stored in the flash memory.
1.3.2

TFTP Software Update

For a tftp update you need a tftp server on which the software to be loaded
is stored.
The URL identifies the path to the software stored on the tftp server. The URL
is in the format
tftp://IP address of the tftp server/path name/file name
(e.g. tftp://192.168.1.1/device/device.bin).
Click "tftp Update" to load the software from the tftp server to the device.
To start the new software after loading, cold start the device
"Restart").
1.3.3

HTTP Software Update

For an HTTP software update (via a file selection window), the device
software must be on a data carrier that you can access via a file selection
window from your workstation.
In the file selection frame, click on "...".
In the file selection window, select the device software (name type: *.bin,
e.g. device.bin) and click on "Open".
Click on "Update" to transfer the software to the device.
The end of the update is indicated by one of the following messages:
Update completed successfully.
Update failed. Reason: incorrect file.
Update failed. Reason: error when saving.
RM Web L3E
Release 6.0 07/2010
1.3 Software
(see on page 39
27