Í [Pet]; Party] - Panasonic LUMIX DMC-GF1K Operating Instructions Manual

∫ Birthday/Name setting
1
Press 3/4 to select [AGE] or [NAME] and then press 1.
2 Press 3/4 to select [SET] and then press [MENU/SET].
3 Enter the birthday or name.
Birthday: 2/1: Select the items (year/month/day).
3/4: Setting.
[MENU/SET]: Exit.
Name: For details on how to enter characters, read the
[TITLE EDIT] section on P138.
• When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
• If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4
Press [MENU/SET] to finish.
• You can also use the rear dial to set.
∫ To cancel [AGE] and [NAME]
Select the [OFF] setting in step
Note
• During Motion Picture Recording, settings for [PORTRAIT] are used.
• The age and name can be printed out using the "PHOTOfunSTUDIO 4.0 HD Edition" bundled
software on the CD-ROM (supplied).
• If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
• Intelligent ISO sensitivity control is activated, and maximum ISO sensitivity level becomes
[ISO400].
• If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
• If the age is not properly displayed, check the clock and birthday settings.
• The Birthday Setting and Name Setting can be reset with [RESET].
• The initial setting for [AF MODE] is [š].
Select this when you want to take pictures of a pet such as a dog or a cat.
You can set your pet's birthday and name. You can select to have these appear at the time
of playback, or have them stamped on the recorded image using [TEXT STAMP] (P139).
For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P92.
Note
• It will be a normal motion picture recording during the motion picture recording.
• The initial setting for the AF assist lamp is [OFF].
• Intelligent ISO sensitivity control is activated, and maximum ISO sensitivity level becomes
[ISO800].
• The initial setting for [AF MODE] is [
• Refer to [BABY1]/[BABY2] for other information about this mode.
Select this when you want to take pictures at a wedding reception, an indoor party etc.
This allows you to take pictures of people and the background with near real-life
brightness.
2 of the "Birthday/Name setting" procedure.
í [PET]
].

2 [PARTY]

Advanced (Recording pictures)
VQT2G62
93