Panasonic LUMIX DMC-GF1K Operating Instructions Manual page 135

Press 4 to finish the slide show.
• Normal playback resumes after the slide show finishes.
∫ Operations performed during slide show
The cursor displayed during playback is the same as 3/4/2/1.
• The menu screen is restored when [‚] is pressed.
A Play/Pause
B Stop
C Back to previous picture
D Ahead to next picture
¢ These operations can be performed only in the Pause Mode or
during motion picture playback.
E Reduce volume level
F Increase volume level
∫ Changing the slide show settings
You can change the settings for slide show playback by selecting
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects when switching from
one picture to the next.
[NATURAL], [SWING], [URBAN], [OFF]
• When [URBAN] has been selected, the picture may appear in black and white as a screen
effect.
• [EFFECT] is set to [OFF] when playing a slide show with motion pictures only.
[SETUP]
[DURATION] or [REPEAT] can be set.
Item
[DURATION]
[REPEAT]
[MUSIC]
[AUDIO]
• [DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
• [AUDIO] can be set only when [OFF] has been selected as the [MUSIC] setting. Audio will be
played along with the still picture with audio or audio of the motion picture by setting the
[AUDIO] to [ON].
Note
• Music effects cannot be played back simultaneously with motion pictures or still pictures with audio.
• It is not possible to add new music effects.
¢
¢
1SEC./2SEC./3SEC./5SEC.
ON/OFF
ON/OFF
ON/OFF
Settings
Advanced (Playback)
135
VQT2G62