Adjusting The Custom Settings To Achieve Desired Effects - Panasonic LUMIX DMC-GF1K Operating Instructions Manual

Press [MENU/SET] to set.
• You can also press the shutter button halfway to set.
• Recording screen is displayed.
∫ Readjust the My Colour settings
Return to above step
• [Fn BUTTON SET] (P31) or [AF MODE] (P71) cannot be set with 4/2. Make the setting with
the Quick Menu (P30).
Note
• During Motion Picture Recording, settings for My Colour Mode are used.
• My Colour settings are memorised even if the camera is turned off.
• Auto Bracket cannot be used in My Colour Mode.
• ISO sensitivity will be fixed to [AUTO].
• [I.EXPOSURE], [COLOR SPACE] can be set only when the My Colour Mode is set to
[CUSTOM].
• The following items cannot be set in My Colour Mode because the camera automatically
adjusts them to the optimal setting.
– [FILM MODE]/[FLASH]/[FLASH SYNCHRO]/[ISO LIMIT SET]

Adjusting the custom settings to achieve desired effects

By selecting [CUSTOM], you can take pictures with colour, brightness and saturation
adjusted to desired levels.
In step 2 on page 94, select [CUSTOM] and press [MENU/SET]
Press 3/4 to select an item and 2/1 to adjust.
• You can also use the rear dial to set.
Item
[COLOR]
[BRIGHTNESS]
[SATURATION]
[RESET]
• Description of adjustment is displayed by pressing [DISPLAY]. (It will return to selection
screen when it is pressed again.)
2
by pressing rear dial or one of 3/4/2/1.
Adjustment contents
This will adjust the colour of the
image from red light to blue light.
(11 steps in n5)
This will adjust the brightness of
the image. (11 steps in n5)
This will adjust the colour
intensity of the image from black
and white to vivid colour.
(11 steps in n5)
Return all settings to default
Advanced (Recording pictures)
VQT2G62
95