Using The Playback Zoom - Panasonic LUMIX DMC-GF1K Operating Instructions Manual

Rotate the rear dial right.
1k>2k>4k>8k>16k
• When you rotate the rear dial left after enlarging the picture,
the magnification becomes lower.
• When you change the magnification, the zoom position
indication A appears for about 1 second, and the position of
the enlarged section can be moved by pressing 3/4/2/1.
• The more a picture is enlarged, the more its quality
deteriorates.
• When you move the position to be displayed, the zoom
position indication appears for about 1 second.
∫ Switching the displayed image while maintaining the Playback Zoom
You can switch the displayed image while maintaining the same zoom magnification and
zoom position for the Playback Zoom.
Switch to picture select operation by pressing
the rear dial during Playback Zoom, and select
pictures with 2/1.
• It will switch between picture select operation and move
zoom position operation every time the rear dial is pressed
during Playback Zoom.
Note
• You can also delete the recording information etc. on the LCD monitor/optional external
viewfinder during Playback Zoom by pressing [DISPLAY].
• If you want to save the enlarged picture, use the trimming function. (P142)
• The Playback Zoom may not operate if pictures have been recorded with other equipment.
• The zoom magnification and the zoom position are cancelled when the camera is turned off
(including power save mode).
• The zoom position returns to the centre in the following images.
– Images with different aspect ratios
– Images with different numbers of recorded pixels
– Images with a different rotation direction (when [ROTATE DISP.] is set to [ON])
• Playback Zoom cannot be used during motion picture playback or pictures with audio playback.

Using the Playback Zoom

Basic
A
53
VQT2G62