Table of Contents
Advertisement
[Baby1]/[Baby2]
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [Baby1] and [Baby2]. You can select
to have these appear at the time of playback, or have them stamped on the recorded
image using [Text Stamp] (P102).
∫ Birthday/Name setting
1
Touch [Age] or [Name].
2
Touch [SET].
3
Enter the birthday or name.
Birthday:
Touch [3]/[4] for each item to set year/month/day, and touch [Set].
Name:
For details on how to enter characters, refer to "Entering Text" on P72.
•
When the birthday or name is set, [Age] or [Name] is automatically set to [ON].
•
If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4
Touch [Exit] to finish.
∫ To cancel [Age] and [Name]
Select the [OFF] setting in step
Note
•
The age and name can be printed out using the "PHOTOfunSTUDIO 6.4 HD Lite Edition with
Wi-Fi" bundled software on the CD-ROM (supplied).
•
If [Age] or [Name] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed.
•
Shutter speed may slow down up to 1 second.
[Pet]
Select this mode when you want to take pictures of a pet such as a dog or a cat.
You can set your pet's birthday and name.
For information about [Age] or [Name], refer to [Baby1]/[Baby2] on P61.
Recording
2
.
- 61 -
Advertisement
Table of Contents
