[Title Edit] - Panasonic LUMIX DMC-GF1K Operating Instructions Manual

Advanced (Playback)
You can add text (comments) to pictures. After text has been registered, it can be included
in prints using [TEXT STAMP] (P139). (Only alphabetic characters and symbols can be
entered.)
Names set in [BABY1]/[BABY2] and [PET] in Scene Mode or [LOCATION] in Travel Date
are also recorded as the titles.
Select [TITLE EDIT] on the [PLAYBACK] mode menu. (P28)
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Select the picture, and then
press [MENU/SET] to set.
• ['] is displayed for pictures with titles
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
• The setting is cancelled when [DISPLAY] is pressed again.
Press 3/4/2/1 to select text and then press
[MENU/SET] to register.
• Press [DISPLAY] to switch text between [A] (capitals), [a]
(small case) and [&/1] (special characters and numbers).
• The entry position cursor can be moved left and right with the
rear dial.
• To enter a blank, move the cursor to [SPACE] or to delete an entered character, move
the cursor to [DELETE], and press [MENU/SET].
• To stop editing at any time during text entry, press [‚].
• A maximum of 30 characters can be entered. (Maximum of 9 characters when setting
names in [FACE RECOG.])
Press 3/4/2/1 to move the cursor to [EXIT] and then press
[MENU/SET] to end text input.
Press [‚] to return to the menu screen.
¢The menu screen is automatically restored when [MULTI] is selected.
• Press [MENU/SET] to close the menu.
138
VQT2G62

[TITLE EDIT]

[SINGLE]
Press 2/1 to select
the picture.
¢
[MULTI]
Press 3/4/2/1 to
select the pictures.