Resetting The Password; Command Summary; Figure 3-5 Password Changing; Figure 3-6 Password Resetting - ZyXEL Communications Prestige 861 User Manual

Prestige 861 VDSL Modem
P861:/> passwd
Changing password for admin
(current) password:
New P861 password:
Retype new P861 password:
passwd: all authentication tokens updated successfully
P861:/>
Step 3. Type your new system password after New P861 password (up to 32 alpha-numeric characters),
and press [ENTER]. The password is case sensitive.
Step 4.
Re-type your new system password after Retype new P861 password for confirmation and press
[ENTER].

3.3.4 Resetting the password

If you forget your password, you will need to reset the password to "1234".
Step 1.
Turn on the Prestige and press any key to stop auto-booting at the prompt "Press any key to stop
auto-booting ..... ".
Step 2. Type "resetpawd" and press [ENTER].
Step 3. Type "1234" after resetting password, root passwd required, and press [ENTER].
Bootloader Version: V1.6 | 2003/09/09 22:59:45
RAM: Size = 16384 Kbytes
TEST SDRAM: Verifying 832Kbytes
Press any key to stop auto-booting......
Type "help" to get a list of commands
P861> resetpawd
resetting password, root passwd required :1234
*password initialized
P861>
3.4

Command Summary

The following table is a summary of the commands available in the Prestige together with a brief description
of each command.
3-4
Erase Block at : 0x205f0000.
Erase Old System Configuration

Figure 3-5 Password Changing

Erase Block at : 0x205F0000.*

Figure 3-6 Password Resetting

[OK]
Commands Introduction