ZyXEL Communications Prestige 861 User Manual page 58

Prestige 861 VDSL Modem
bin
hash
put zimage kernel
put cramdisk.gz ramdisk
Step 5. The firmware files "zimage" and "cramdisk.gz" have been transferred into the Prestige but have
not been written into Flash yet. The Prestige will start writing the firmware file into flash after you
issue the bye command. This may take about 60 seconds. After the Prestige finishes upgrading
the firmware, it will automatically restart again and the IP address will be reset to 192.168.1.1
(default).
Do not turn off the device until the Prestige restarts completely.
8-2
Please wait for 60 seconds after you issue bye.
Firmware Upload