Baby Bottles (Bc) - Miele PG 8527 Operating Instructions Manual

Baby bottles (BC)

Baby bottles in E 135 containers can be
placed in the two lower levels of mobile
unit E 935/1 and then cleaned and
disinfected in this washer-disinfector. In
addition, E 364 containers with
wide-necked teats and E 458
containers with screw-cap teats can be
placed in the upper level of the mobile
unit.
– Ensure the level marker on the
bottles is machine-washable.
– If there is a delay of 4 hours or more
before bottles can be washed, fill
them with water to prevent residues
from drying on.
If the process is not to be followed
by sterilisation, the load should be
dried completely to avoid the
development of water-borne
bacteria.
A sufficient drying time is, therefore,
absolutely essential.
Inserts for baby bottles and teats are
supplied with their own operating
instructions.
Areas of application
Loading in E 935/1 mobile unit
Lower level with 4 x E 135 containers
Upper level with 3 x E 135 containers
The containers must be arranged so
that the two blocked off corners are
in the positions marked with
crosses, as shown.
If bottles were to be placed in these
positions, water would not be able to
access the inside of the bottles
properly and cleaning results would
be impaired.
33