Maintenance And Care - Flex LD 15-10 125 R Original Operating Instructions

7. Increase the pressure to bring the sanding
pad into contact with the work surface. In
doing so, slew the renovation sander with
overlapping movements.
8. Sanding in corners (LD 15-10 125 R):
– Switch off the power tool and wait until
the sanding tool has come to a standstill.
– Pull out pivoted edge segment and swivel
to left.
– Switch on power tool again.
9. After work, switch off the electric power
tool and pull out the mains plug.
Brush ring (LD 15-10 125 R)
The guard features a brush ring. This ring has
two functions:
– As the ring projects above the surface of the
sanding pad, it is the ring which comes into
contact with the work surface first.
As a result, the sanding pad is brought
parallel to the work surface before the
sanding tool comes into contact with the
work surface. This avoids a sickle-shaped
depression caused by the edge of the
sanding pad.
– The ring retains the dust until it is extracted
by the dust extractor.
22
LD 15-10 125 R / LD 15-10 125
If the brush ring is damaged or excessively
worn, it should be replaced.
A replacement brush set is available from any
FLEX-customer service centre.
Rubber extraction ring
(LD 15-10 125)
If the rubber extraction ring is damaged
or excessively worn, it should be replaced.
A replacement extraction ring is available from
any FLEX customer service centre.

Maintenance and care

t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK=
Cleaning
t^okfkd>
aç åçí=ìëÉ=ï~íÉê=çê=äáèìáÇ=ÇÉíÉêÖÉåíëK
 Regularly blow out the housing interior
and motor with dry compressed air.
 Clean the guard and pivoted edge segment
using dry compressed air.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
klqb
aìêáåÖ=íÜÉ=ï~êê~åíó=éÉêáçÇ=Çç=åçí=äççëÉå=
íÜÉ ëÅêÉïë=çå=íÜÉ=ãçíçê=ÜçìëáåÖK=
kçåJÅçãéäá~åÅÉ=ïáää=ÇÉÉã=íÜÉ=Öì~ê~åíÉÉ=
çÄäáÖ~íáçåë=çÑ=íÜÉ=ã~åìÑ~ÅíìêÉê=åìää=~åÇ=îçáÇK
Spare parts and accessories
Other accessories, in particular insertion tools,
can be found in the manufacturer's catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com