Help Guide | Turning The Power On - Sony SRS-HG1 Help Manual

Help Guide
Personal Audio System
h.ear go (SRS-HG1)
Turning the power on
Press the (power)/
1
The (power) indicator lights up in green.
Hint
The LINK indicator may also begin to flash when the speaker is turned on.
It may take a while before the speaker turns on.
When you turn on the speaker in the BLUETOOTH/Network standby mode, the start-up time becomes shorter and the speaker will become
operational sooner, than when you turn on the speaker in standby mode.
To turn on the BLUETOOTH/Network standby mode, first turn on the speaker that is connected to an AC outlet via the supplied USB AC adaptor
and micro-USB cable. Then press and hold the
orange.
Note
When the CHARGE indicator flashes slowly, the battery is running low and needs to be charged. Charge the speaker by connecting to an AC
outlet via the USB AC adaptor.
When the speaker is being powered by the built-in battery only, the BLUETOOTH/Network standby mode is not available.
Related Topic
Turning the power off (standby mode)
About the indicators
Using the BLUETOOTH/Network standby mode
PAIRING button.
(power)/ PAIRING button and the FUNCTION button until the (power) indicator lights up in
34