Sony SRS-HG1 Help Manual page 111

Check that the LINK indicator changes from flashing to staying lit in orange.
4
When the Wi-Fi connection is established, the LINK indicator lights up in orange.
Depending on the environment, it may take more than a minute for the LINK indicator to light up.
The connection is established.
If the LINK indicator flashes in red
The speaker failed to connect to the Wi-Fi network. Try connecting again from step
Hint
For details on the Wi-Fi Protected Setup (WPS) button of your wireless router, refer to the operating instructions of your wireless router.
If the Wi-Fi connection fails even if you try several times, initialize the speaker and delete the setting information of the Wi-Fi connection, then try
connecting again.
Note
When you connect the speaker to a Wi-Fi network for the first time after purchase, or after you initialize the speaker, the BLUETOOTH/Network
standby mode is turned on automatically.
Related Topic
Using the BLUETOOTH/Network standby mode
Updating the pre-installed software
Initializing the speaker
4-589-712-11(2) Copyright 2016 Sony Corporation
.
95