Sony SRS-HG1 Help Manual page 157

Help Guide
Personal Audio System
h.ear go (SRS-HG1)
Selecting the BLUETOOTH audio streaming playback quality (Codec)
The "Priority on sound quality" and "Priority on stable connection" modes are available as options for selecting the playback quality
of BLUETOOTH audio streaming. "Priority on sound quality" enables you to play back with a setting of, not only SBC, but also
AAC and LDAC, so that you can enjoy high-quality sound via BLUETOOTH. "Priority on stable connection" provides you with a
more stable BLUETOOTH audio streaming. "Priority on sound quality" is the default setting.
The sound quality can be changed while the speaker is in the BLUETOOTH/Network standby mode.
Playback quality
Priority on sound quality (default setting): Optimal codec is automatically selected from AAC, LDAC, and SBC.
Priority on stable connection: SBC is selected.
Set the speaker to the BLUETOOTH/Network standby mode when the speaker is connected to an AC
1
outlet via the supplied USB AC adaptor and micro-USB cable.
The (power) indicator lights up in orange.
Press and hold the
2
When the setting is changed to "Priority on sound quality" mode, the BLUETOOTH indicator flashes three times.
When the setting is changed to "Priority on stable connection" mode, the BLUETOOTH indicator flashes twice.
The playback quality is switched, and the speaker turns on.
Hint
You can switch the playback quality by using SongPal. "Priority on sound quality" appears as [Auto] and "Priority on stable connection" appears as
[SBC] when setting with SongPal.
(power)/ PAIRING button and + (volume) button for more than four seconds.
141