Help Guide | Connecting To An Ac Outlet - Sony SRS-HG1 Help Manual

Help Guide
Personal Audio System
h.ear go (SRS-HG1)
Connecting to an AC outlet
You can operate the speaker by connecting to the AC outlet with the supplied USB AC adaptor or by using the built-in lithium-ion
battery (rechargeable).
Before using the speaker for the first time, be sure to charge the battery by connecting the speaker to an AC outlet via the
supplied USB AC adaptor and micro-USB cable.
When connecting the micro-USB cable to the DC IN 5 V jack, the
seconds, and then the speaker enters the start-up mode. It takes about 15 to 30 seconds. After that, the
in red (standby mode), and you can turn on the speaker.
When the battery is charged, you can use the speaker without using the USB AC adaptor.
*1 For the protection of the battery, the
Connect the supplied USB AC adaptor and micro-USB cable.
1
Connect the micro-USB cable to a DC IN 5 V jack.
2
Connect the USB AC adaptor to an AC outlet.
3
Do not use other than the supplied USB AC adaptor, micro-USB cable, and AC power cord.
When the speaker is connected to an AC outlet via the USB AC adaptor, charging starts and the CHARGE indicator lights up
in orange. Charging is completed in about 3 hours
*2 When the speaker is turned off, time that is required to charge the empty battery to its full capacity.
*1
(power)/ PAIRING button is locked when shipping.
*2
and the indicator turns off.
(power) indicator starts flashing in green after about two
(power) indicator is lit
32