Sony SRS-HG1 Help Manual page 120

Turn the speaker on.
2
The (power) indicator lights up in green.
Press the FUNCTION button repeatedly until the BLUETOOTH indicator flashes.
3
The speaker enters the BLUETOOTH mode.
When you turn on the speaker for the first time after purchase, pairing information is not stored in the speaker. In this
case, by only placing the speaker in the BLUETOOTH mode, the BLUETOOTH indicator will begin to flash quickly and
the speaker will enter the pairing mode automatically. Then go to step
When you turn on the BLUETOOTH mode, the speaker will try to make a BLUETOOTH connection with the last
connected BLUETOOTH device. If the device is nearby, the BLUETOOTH connection establishes automatically and the
BLUETOOTH indicator stays lit. In this case, turn off the BLUETOOTH function on the BLUETOOTH device, or turn off
the BLUETOOTH device.
Set the speaker to the pairing mode.
4
Press and hold the
quickly.
Perform the pairing procedure on the PC.
5
(power)/ PAIRING button until the speaker beeps and the BLUETOOTH indicator starts flashing
.
104