Turning On The Power - Sony LBT-G1000 Operating Instructions Manual

AM Antenna Connection
Connect the supplied loop antenna to the AM and A
terminals.
You can attach the loop antenna on the wall using
commercially available screws.
For better reception
In addition to the loop antenna, connect an insulated wire of
20- to 50- feet (6 to 15 meters) to the AM terminal (the lower
terminal). Be sure not to disconnect the loop antenna.
Adding Other Components to the System
Connecting a video equipment (for LBT-G1000)
You can connect a video equipment to the VIDEO IN jacks
only for the audio input signal.
To select the video equipment, press the VIDEO button.
Note
When this system is turned on, noise may occur during radio
reception or in the picture and sound of the video
equipments (TV, VTR, etc.). In this case, place this system
away from the video equipments or turn off the power of the
unit.
Connecting a turntable (for LBT-D150)
You can connect a turntable system (PS-LX56, etc.) to the
PHONO IN jacks. To listen to analog discs, press the
PHONO button.
AC Power Cord [D]
Connect the AC power cord to a wall outlet.
Note
Memories stored in the unit may be lost when the AC power
cord is disconnected for a certain period of time.
Turning on the Power
Press the POWER button to turn on the power after
completing all connections.