Help Guide | Initializing The Speaker - Sony SRS-HG1 Help Manual

Help Guide
Personal Audio System
h.ear go (SRS-HG1)
Initializing the speaker
With the speaker turned on, press and hold the
more than four seconds.
The (power) indicator flashes quickly in green for two seconds. The settings of the speaker return to their factory defaults, and
network information and all BLUETOOTH device registration (pairing) information are deleted. Then, the speaker enters the start-
up mode automatically. It takes about 15 to 30 seconds to turn on the speaker. When the
(standby mode), you can turn on the speaker.
Note
If you initialize the speaker, it may not be able to make a BLUETOOTH connection with your iPhone/iPod touch or PC. In this case, erase the
pairing information of the speaker on your iPhone/iPod touch or PC, and then perform the pairing procedure again.
4-589-712-11(2) Copyright 2016 Sony Corporation
(power)/ PAIRING button and the - (volume) button at the same time for
(power) indicator lights up in red
248