Connecting To An Ac Outlet - Sony SRS-XB3 Help Manual

Help Guide
Personal Audio System
SRS-XB3

Connecting to an AC outlet

The speaker can be operated by connecting it to an AC outlet via AC adaptor (supplied) or built-in battery (rechargeable).
Before using the speaker for the first time, be sure to charge the battery by connecting the speaker to an AC outlet via the
supplied AC adaptor.
You can operate the speaker by battery instead of the AC adaptor by charging the speaker before use.
Connect the supplied AC adaptor to the DC IN 15V jack.
1
Plug the AC adaptor to an AC outlet.
2
Charging starts and the CHARGE indicator lights up in orange. Charging is completed in about four hours
turns off. Once the battery is fully charged, it will not be charged furthermore even if the speaker is kept connected to an AC
outlet.
*1 Time that is required to charge the empty battery to its full capacity.
Battery life (when using the BLUETOOTH connection)
*2*3
About 24 hours .
The time stated above may vary depending on ambient temperature or conditions of use.
*2 The method of estimating the battery life has been changed since 2015.
*3 When the specified music source is used and the volume level of the speaker is set to 10. If the volume level of the speaker is set to maximum, the
usage life will be approx. 4 hours. Time may vary, depending on the temperature or conditions of use.
When the battery is running low
*1
and the indicator
5