SEM 0300 Operational Manual
  1. Manuals
  2. Brands
  3. SEM Manuals
  4. Paper Shredder
  5. 0300
  6. Operational manual

SEM 0300 Operational Manual

Hard drive shredder
Hide thumbs Also See for 0300:
Table of Contents

Advertisement

Quick Links

Download this manual
Security Engineered Machinery Co., Inc
OPERATIONAL MANUAL
For
SEM Model 0300 Hard Drive Shredder
S/N: 2405061-A and Up
POP-0008 Rev. 8
Revised: 08/05/2016
Security Engineered Machinery Co., Inc.
NATIONWIDE SERVICE
Phone Toll Free: 1(800)225-9293
Email:Service@SEMSHRED.com
Fax: (508)366-6814
Website:
WWW.SEMSHRED.COM

Advertisement

Table of Contents
loading

Related Manuals for SEM 0300

Summary of Contents for SEM 0300

  • Page 1 Security Engineered Machinery Co., Inc OPERATIONAL MANUAL SEM Model 0300 Hard Drive Shredder S/N: 2405061-A and Up POP-0008 Rev. 8 Revised: 08/05/2016 Security Engineered Machinery Co., Inc. NATIONWIDE SERVICE Phone Toll Free: 1(800)225-9293 Email:Service@SEMSHRED.com Fax: (508)366-6814 Website: WWW.SEMSHRED.COM...

  • Page 2: Table Of Contents

    Startup and Operation 10-11 Important Feed Information (See also label on top of machine) 11-12 Materials Tested Maintenance 14-15 Trouble Shooting 16-17 Electrical Schematics 18-19 Cutting Head Exploded Assembly 20-21 Cutting Head Bill of Materials SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...

  • Page 3: Important Safety Processes

    MPOR RTAN T SAF FETY Y PRO OCEDU URES S*** Your new SE EM Model 0 0300 Hard D Drive Shredde er incorpora ates powerful l, heavy duty y cutting mechanisms. . Serious an nd permanen nt injury m may result if...

  • Page 4: General Assembly Drawings

    General Assembly Drawing Control Panel Top cover Drop Chute Shredder Cabinet Collection Bin Access Door SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...
  • Page 5 Serial Number Tag Location Back Panel Power Cord Shredding Chamber Electrical Box Collection Bin Reverse Contactor Forward Contactor Filter Contactor Overload SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...

  • Page 6: Power Supply Requirements

    FOR 120 VOLT/1 PH / 60 HZ Note to Installer: The Model 0300 Hard Drive Shredder has been supplied with a power cord and male plug for 20 amp service. The male plug is a NEMA #5-20P and requires a NEMA #5-20R receptacle connection as noted on page 5.

  • Page 7: Plug And Receptacle Information

    Plug and Receptacle Information SEM normally supplies a male plug and cord prewired to the shredder unit for single phase. The NEMA Configurations are as followed: Model 0300 Hard Drive Shredder 115 volts – 125 volts single phase SEM supplies a NEMA #5-20P the customer needs to supply a NEMA #5-20R receptacle.

  • Page 8: Unpacking Instructions

    Tools needed: Lift Truck Note: It is recommended to lift the 0300 Hard Drive Shredder from the front with the forks 30” apart. The majority of the weight will be on the right side of the 0300 Hard Drive Shredder.

  • Page 9: Installation Instructions

    SHREDDER LOCATION: The Model 0300 Hard Drive Shredder can be located in an office or warehousing area within 6 feet of a wall receptacle. It is recommended that the machine be 3 to 4 inches away from the wall for proper ventilation.

  • Page 10: Startup And Operation

    1) Plug power cable into standard 20 amp outlet. Important Note: For 120 volts: Shredder must be plugged into a dedicated 20 amp circuit. SEM recommends that no more than a 3% voltage drop on the outlet for optimal performance. (Minimum of 117 volts) For 220 volts: Shredder must be plugged into a dedicated 15 amp circuit.

  • Page 11: Important Feed Information (See Also Label On Top Of Machine)

    7) Turn “key-switch” located on the left side of the shredder cabinet to the OFF position. Important Feeding Information Before introducing any destruction material into feed chute of the shredder, the Model 0300 Hard Drive Shredder must be turned on and operating. It is recommended that the material collection bin be checked and emptied before operating.
  • Page 12 For power requirements refer to page 6. Warning: Over adjustment can cause the Overload to trip which will not allow the 0300 to start until the Overload is reset. The Overload will automatically rest once it has cooled down this may take several minutes.

  • Page 13: Materials Tested

    1) Drives that have thick steel parts. These steel parts may need to be removed prior to shredding in order to prevent jamming. 2) Drives with multiple steel plates covering platters. These plates may need to be removed prior to shredding to prevent jamming. SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...

  • Page 14: Maintenance

    ALWAYS unplug power cord from receptacle before cleaning, lubricating, maintaining, removal of any guards and after shredding operation is complete. Warning: Shredded material can be sharp, SEM recommends wearing gloves. Tools Needed: Gloves, Pliers and other hand tools Cleaning: For optimal performance, regular cleaning is recommended: Daily - After approximately 8 hours of operation.
  • Page 15  The charcoal filter should be changed three times as often as the HEPA filter is changed  The charcoal filter is located behind the HEPA filter, and should be compressed for maximum efficiency HEPA FILTER CHARCOAL FILTER UNIT CABINET FILTER PANEL SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...

  • Page 16: Troubleshooting

    6) Loose wire in panel. Check terminal strip for disconnected or loose wires. Reconnect and tighten loose wires to proper location on strip. 7) Defective contact block on stop Check block for continuity. If bad, button replace. SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...
  • Page 17 Conduct amperage test. Consult factory for replacement motor. Shredding capacity Un-lubricated cutter head. Clean and oil cutter head. is low. Low voltage. Check voltage at power supply. Current relay set too low. Consult factory before making any adjustments. SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...

  • Page 18: Electrical Schematics

    MODEL 0300 ELECTRICAL SCHEMATIC (SHEET 1) SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...

  • Page 19: Electrical Schematics

    MODEL 0300 ELECTRICAL SCHEMATIC (SHEET 2) SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...

  • Page 20: Cutting Head Exploded Assembly

    SEM MODEL 0300 CUTTING HEAD ASSEMBLY SEM MODEL 0300 MOTOR ASSEMBLY SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...
  • Page 21 SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...

  • Page 22: Cutting Head Bill Of Materials

    IDLE SHAFT CUTTER  1  16  33615  DRIVE SHAFT ‐ HARDENED 4041 HEX  1  17  33624  FALSE FLOOR  1  18  33625  1/4 PL. UNIVERSAL BRACE PLATE  2  19  33585  IDLE BEARING BLOCK  1  20  33584  DRIVE BEARING BLOCK  1  21  33773  4" X 4" X 1/2" < ‐ 17"  2  22  111909  REDUCER  1  23  MOTOR  MOTOR ‐ 1HP OR 1.5 HP  1  SEM ‐ Security Engineered Machinery For NATIONWIDE SERVICE Call 1(800)225-9293...

Table of Contents