Overview Of Device - MAGINON HS 120 Instruction Manual

4.2. Overview of device

Element
1 Mini USB interface
2 Battery compartment
3 ON/OFF button
4 Memory card slot
5 JPG/PDF / UP key
6 COLOR / MONO key
7 ENTER key
8 DPI / DOWN key
9 LCD display
10 TIME SET / FORMAT key
11 Format setting
The USB interface serves to provide power for the scanner via the supplied
USB power supply or a computer. The interface can also be used for connec-
ting the device to a computer for transferring images.
Insert four AA batteries or rechargeable batteries with the same specification
in the battery compartment.
Switch on device by pressing this button. Press again to switch off device.
This slot accommodates microSD/SDHC memory cards.
JPG/PDF: In the scan mode the key can be used for selecting the scan format
JPG or PDF. The LCD display then shows the respective setting JPG or PDF.
UP: The key can also be used for setting the time.
In the scan mode the key can be used for selecting colour or b/w scanning.
The LCD display then shows the respective symbol COLOR or MONO.
Press this key to confirm any changes.
DPI: In the scan mode the key can be used for selecting high (900 dpi),
medium (600 dpi) or low (300 dpi) solution. The LCD display then shows the
respective resolution symbol (HI, MI or LO).
DOWN: The key can also be used for setting the time.
The LCD display indicates the device status.
TIME SET: Press this key for about 3 seconds to enter the date and time
setting mode.
FORMAT: Press this key once to format the microSD card.
The slider is used to set the paper format to be scanned.
Function
7