Scanning - MAGINON HS 120 Instruction Manual

5.9. Scanning

As soon as all settings have been entered and a memory card has been inserted into the scanner,
documents and images can be scanned.
1. Press the ON/OFF key to switch on the scanner.
2. The scanner is now in standby operation (ready mode). Select the file format, colour or b/w scan-
ning and high or low resolution, as required.
3. Push document with side to be scanned facing down into scanner until resistance can be felt.
Release the document, after a short delay the scanner starts to pull in and scans the document.
4. The green LED of the ON/OFF key is illuminated during scanning.
5. The scanned document is saved to the memory card as a JPEG or PDF file.
6. Once the document has been scanned, the scanner reverts to the ready mode and the next docu-
ment can be scanned in.
13