Description; Insert Tools, Accessories; Technical Data - Hilti SFC 14-A Operating Instructions Manual

2.3 Switches
Control switch with electronic speed control
2-speed gear selector switch
Forward / reverse selector switch with safety lock
Torque and drilling mode setting ring
2.4 Grips
Vibration-absorbing grip
2.5 Lubrication
Grease lubrication
2.6 The items supplied include (toolbox versions):
1 Power tool
1 Operating instructions
1 Hilti toolbox
2.7 The items supplied include (cardboard box versions):
1 Power tool
1 Operating instructions
2.8 Additional items required for operating the tool
B 22/1.6 Li-ion, B 22/2.6 Li ion, B 22 3.3 Li ion, B 14/1.6 Li ion or B 14/3.3 Li ion battery with C 4/36,
C 4/36 ACS or C 4/36 ACS TPS charger.
2.9 Li-ion battery charge status and overheating indicator
LEDs light constantly
LED 1,2,3,4
LED 1,2,3
LED 1,2
LED 1
-
-
2.10 Overload and overheating protection
The power tool is equipped with an electronic protection system to prevent overloading and overheating. The
power tool switches itself off automatically in the event of overloading and overheating. After releasing the
control switch, the power tool may not restart immediately when the switch is pressed again (while the power
tool is cooling down).

3. Insert tools, accessories

Designation
Bit holder
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Battery
Battery
Battery
Battery
Battery
Belt hook (optional)
Designation
Keyless chuck clamping range
Drilling diameter range in wood (soft)
Drilling diameter range in wood (hard)
Drilling diameter range in metal
Wood screws (max. length 80 mm)
Driving screws in plastic anchors (max. length
120 mm)

4. Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC voltage)
Weight in accordance with EPTA
procedure 01/2003
Dimensions (L x W x H with B
14/1.6 or B 22/1.6)
1st gear speed (with B 14/3.3 or
B 22/2.6)
2nd gear speed (with B 14/3.3 or
B 22/2.6)
Torque with tool set to drilling
symbol (soft/flexible joint)
Torque range (15 settings)
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
Printed: 02.07.2013 | Doc-Nr: PUB / 5071588 / 000 / 00
LEDs blink
-
-
-
-
LED 1
LED 1
17
Short designation
S-BH 50
C 4/36
C 4/36 ACS
C 4/36-ACS TPS
B 22/1.6 Li ion
B 22/2.6 Li ion
B 22/3.3 Li ion
B 14/1.6 Li ion
B 14/3.3 Li ion

Description

1.5...13 mm
1.5...20 mm
1.5...12 mm
1.5...10 mm
3...6 mm
Max. 8 mm
SFC 14 A
14.4 V
1.5 kg
192 mm x 80 mm x 225 mm
0...500/min
0...1,700/min
Max. 24 Nm
1.5...10 Nm
18
Charge status C
C 75 %
50 % C < 75 %
25 % C < 50 %
10 % C < 25 %
C < 10 %
Battery overheated
SFC 22 A
21.6 V
1.7 kg
202 mm x 92 mm x 234 mm
0...600/min
0...1,800/min
Max. 28 Nm
1.5...10 Nm
en