Keypad - Projectiondesign F22 User Manual

G

KEYPAD

The keypad is illuminated for operation in dark environments. Available
functions are illuminated in yellow while selected (active) functions are
illuminated in green. Functions that are not available are not illuminated.
In addition to the various functions, 10 keys are numbered 0-9. These
keys are used for PIN code and other numeric functions as applicable.
POWER
Switches the projector between on and standby modes. Press firmly
(1 sec) to switch on. Press firmly (1 sec) twice to switch off.
AUTO
Adjusting the projector to display a correct image, including position,
width, height, contrast, brightness and overall stability.
MENU
Activates the menu system. Use the four arrow keys to navigate and
«OK» to activate.
ARROW KEYS
Use the arrow keys to navigate the menu system or to control lens and
LCD functions.
OK
Confirm menu option when menu system is activated.
ZOOM
Select ZOOM, then use arrow keys to zoom in or out.
FOCUS
Select FOCUS, then arrow keys to focus the image
SHIFT
Select SHIFT, then the arrow keys to shift the image up, down or
sideways.
IRIS
Select IRIS, then arrow keys to adjust to desired combination of
brightness and contrast.
Downloaded from ProjectorsManual.com Manuals
SHUTTER
Press SHUTTER to stop the projected image completely.
VGA
Selects the VGA input as active source.
DVI
Activates the DVI-D input.
BNC
Selects BNC as source.
YPbPr
Activates the component video input.
S-VIDEO
Selects super video as active source.
C-VIDEO
Activates the composite video input.
X-PORT 1
Activates the X-PORT 1. This key is enabled by the X-PORT 1 device
as and when attached. Functionality depends on the actual device
connected (see separate user guide for this device).
X-PORT 2
Activates the X-PORT 2. This key is enabled by the X-PORT 2 device
as and when attached. Functionality depends on the actual device
connected (see separate user guide for this device).
LIGHT
This key switches the illumination of the connector area on and off.
INDICATORS
The LAMP 1, LAMP 2 and STATUS indicators are not keys, so please
do not push.
10