Indicators - Projectiondesign F22 User Manual

H

INDICATORS

STATUS
Indicates the overall system status by green, yellow and red colors.
PERMANENT GREEN LIGHT
The projector is turned on and in normal operation.
PERMANENT YELLOW LIGHT
The unit is in standby mode; no source(s) connected, or the source(s)
connected are inactive or switched off, thereby activating the power-
save function (DPMS). You may enable or disable the power save
function in the SET UP sub menu, DPMS on or off.
FLASHING YELLOW LIGHT
Please wait. The yellow light will flash a period after power cord is
connected (10-15 sec.), and a period after going to standby mode
while lamp is cooling down (approximately 45 sec.). The projector
may not be turned on again until the light has turned to permanent
yellow.
FLASHING RED LIGHT
Projector is overheated. Turn off immediately! Check if air inlets are
covered or if ambient temperature is outside specifications. The
projector can not be restarted unless the power cord is disconnected
and reconnected again. If the projector continues to flash red, you will
need to return the unit for service.
LAMP 1, LAMP 2
Indicate the status of each lamp by green and red colors.
PERMANENT GREEN LIGHT
The lamp is on and in normal operation.
PERMANENT YELLOW
The lamp is ready and in standby mode
PERMANENT RED LIGHT
Lamp life has expired. Please change projection lamp immediately.
Failing to change lamp may lead to lamp explosion.
NO LIGHT
No lamp inserted / connected
LCD
The projector is fitted with a backlit LCD screen that reports system
status. You can navigate the LCD screen by using the arrow keys on
the keypad.
Downloaded from ProjectorsManual.com Manuals
11