H3C S3610 Series Quick Start Manual page 58

Quick Start
H3C S3610 Series Ethernet Switches
Figure 3-4 Fix front mounting ears (2)
IV. Use front mounting ears and a tray
Follow these steps to install a switch into a 19-inch standard
cabinet:
1) Wear an ESD-preventive wrist strap to check the grounding
and stability of the cabinet.
2) Fix the delivered tray horizontally in a proper position.
3) Take out the screws which are packed together with the
front mounting ears, and fix one end of mounting ears to the
switch, as shown in Figure 3-3.
4) Place the switch on the tray horizontally, slide the tray into
the cabinet, and fix the other end of mounting ears to the
front brackets with crews and captive nuts, as shown in
Figure 3-4.
Chapter 3 Installing the Switch
Front square-holed bracket
Front mounting ear
3-5
Front mounting ear
Front panel