Laser Safety; Installation Tools - H3C S3610 Series Quick Start Manual

Hide thumbs Also See for S3610 Series:

Table of Contents

Quick Start

H3C S3610 Series Ethernet Switches

For the AC power supply that adopts TN system, use a

monophase three-line power socket with Protection Earth

(PE) to effectively filter interference from the power grid.

Keep the device far from radio transmitting stations, radar

stations, and high-frequency devices.

Use electromagnetic shielding when necessary, for example,

use shielded interface cables.

Route interface cables only indoors to prevent signal ports

from getting damaged by overvoltage or overcurrent caused

by lightning strikes.

2.2.4 Laser Safety

The S3610 series are class-1 laser devices.

When the optical ports on your switch are operating, do not stare

into the optical ports because the laser light emitted by the optical fiber

can hurt your retina.

Caution:

Staring into the laser beam produced by the fiber can hurt your eyes.

Flat-blade screwdriver

Phillips screwdriver

Chapter 2 Installation Preparation

2-4

Table of Contents